Vibration machines
These machines are used for sharp edges rounding, oxides and scale removal, grinding, polishing, mat finishing. Through these machines the material surface tensions are reduced and a surface strengthening is achieved also.
These machines are used for sharp edges rounding, oxides and scale removal, grinding, polishing, mat finishing. Through these machines the material surface tensions are reduced and a surface strengthening is achieved also.
| Technical characteristics: | ÂÌ 20 | ÂÌ 100 | ÂÌ 250 | ÂÌ 350 | ÂÌ480 Ì | |
| Working container volume | dm3 | 20 | 100 | 250 | 350 | 480 |
| Treated parts weight | kg | 0,1 | 0,5 | 1,0 | 1,5 | 15 |
| Frequency | Hz | 30 | 25 | 25 | 25 | 25 |
| Amplitude | mm | 0 - 6 | ||||
| Power | kW | 0,75 | 5,5 | 7,5 | 11 | 11 |
| Dimensions - length - width - weight |
mm mm mm |
1350 560 630 |
1780 620 934 |
2160 900 1300 |
2220 1284 1150 |
2520 1320 1510 |
| Weight | kg | 250 | 450 | 900 | 1500 | 2880 |
Deep boring machines
The deep boring machines bore deep holes with L > 5 D in rotating and prismatic parts. This treatment usually is very difficult due to the tools big length, their cooling and oiling and the chips difficult removal. The machines, produced on individual order, use army- or BTA drills technology, which bore or expand holes with length up to (80 - 100) D, H7 - H9 accuracy and the respective Ra 0,63 - 0,32 µm roughness.
| Òåchnical characteristics: | ||
| Treated hole diameter | ||
| - in drilling, max | mm | 60 |
| - in solid material, max | mm | 25 |
| Treated part length | mm | 200 - 1200 |
| Part revolutions | ||
| - when set in the chuck | min-1 | 1500 |
| - when set in the back centres | min-1 | 3500 |
| Working path, max | 1500 | |
| Oiling-coolant medium flow rate | dm3 /min | 30,60,90,120, 150 |
| Oiling-coolant medium filtration rate | µm | 25 |
| Power | kW | 25 |
| Dimensions | ||
| - length | mm | 600 |
| - width | mm | 2500 |
| - height | mm | 2500 |
| Weight | kg | 4000 |
Abrasive-belt grinding machines
Machines and technologies for cylindrical surfaces with up to 60 mm abrasion were designed. The machines modular structure allow for consecutive uninterrupted non-centered parts treatment after two or three machines are connected. The developed polishing modules can be attached to the machines and can be used for pipes non-sized decoration treatment, aimed for the furniture industry.
Through these modules a very good results in the strengthened piston rod fine grinding and a very high roughness rate were achieved.
Abrasive-belt grinding machines for planes, used for polishing and rounding as well as cleaning after die-stamping can be produced upon receiving a customer order.
| Technical characteristics: | ||
| Treated forgings dimensions | ||
| - diameter | mm | 10 - 60 |
| - length | mm | 200 - 2500 |
| Treated surfaces roughness, R | µm | 0,25 - 0,35 |
| Forgings peripheral speed | m/min | 6 -12 |
| Forgings axes speed | m/min | 0,5 -4,0 |
| Abrasive-belt module support working path | mm | 120 |
| Leading mechanism support working path | mm | 95 |
| Support working path for the base knife lifting | mm | 50 |
| Power supply | V/Hz | 380 / 50 |
| Power | kW | 3,94 / 4,74 |
| Dimensions | ||
| - length | mm | 1200 |
| - width | mm | 1200 |
| - height | mm | 2300 |
| Weight | kg | 700 |